# CVE-2026-85034: Out-of-bounds write in the Bluetooth GATT client: oversized notification and indication values delivered to subscribers

Status: published. Published: 2026-11-03. Updated: 2026-11-03.

The Bluetooth host's GATT client passed the value of a received Handle Value Notification, Handle Value Indication or Multiple Handle Value Notification to bt_gatt_subscribe_params::notify callbacks using only the length derived from the received ATT PDU. bt_att_recv() in subsys/bluetooth/host/att.c validates only a minimum PDU length and does not enforce the negotiated ATT MTU, and the fixed ATT L2CAP channel in subsys/bluetooth/host/l2cap.c applies no rx.mtu check either, so the only ceiling was the ACL reassembly buffer CONFIG_BT_BUF_ACL_RX_SIZE. Values longer than the 512-octet maximum attribute length defined by the Bluetooth Core Specification (Vol 3, Part F, Section 3.2.9) could therefore be handed to subscribers that size their buffers to that documented limit.

A remote peer that a device has connected and subscribed to — a malicious, spoofed or compromised GATT server within radio range — triggers the flaw by sending a notification or indication whose value exceeds 512 octets on a subscribed handle. In the LE Audio unicast client this reaches a concrete out-of-bounds write: unicast_client_ep_notify() in subsys/bluetooth/audio/bap_unicast_client.c copies the notification into the 512-byte att_buf of struct unicast_client with net_buf_simple_add_mem() and no tailroom check whenever length equals bt_audio_get_max_ntf_size(), i.e. the negotiated ATT MTU minus three. notify_handler() in subsys/bluetooth/audio/bap_broadcast_assistant.c has the same shape. Reaching the overflow requires a build whose ATT MTU exceeds 515 octets (CONFIG_BT_L2CAP_TX_MTU and CONFIG_BT_BUF_ACL_RX_SIZE set for full-length attribute support); the shipped defaults are far smaller.

The overflow writes peer-controlled bytes past att_buf directly over the adjacent struct net_buf_simple net_buf — its data, __buf, len and size fields — which the subsequent long-read accumulation then uses as its destination, turning a small linear overflow into a controlled write. net_buf_simple_add() only asserts on insufficient tailroom unless CONFIG_NET_BUF_HARDENING is enabled, and that option is disabled by default, so ordinary production builds perform the copy. Beyond the in-tree LE Audio clients, any application subscriber that sized its receive buffer to the specification's 512-octet limit was exposed to the same overflow.

The fix rejects notification, indication and multiple-notification values longer than BT_ATT_MAX_ATTRIBUTE_LEN in call_notify_cb_and_maybe_unsubscribe() in subsys/bluetooth/host/gatt.c before any subscriber callback is invoked, so no subscriber can be handed more than the specified maximum. Remaining tuples of a multiple handle value notification are still delivered and oversized indications are still confirmed.

## Remediation

- fix: The reporting source identifies this reference as a patch. Check the advisory for affected versions and supported release branches. (source: CNA: zephyr) — https://github.com/zephyrproject-rtos/zephyr/commit/64b1e7447856f635ee8bce9eab7c615da78133b8

## Affected products and versions

- zephyrproject / zephyr (zephyr): ≥ 3.4.0; < 4.3.2 (affected, semver); ≥ 4.4.0; < 4.5.0 (affected, semver). Source: CNA: zephyr

## Severity and prioritization

- CVSS 3.1: 6.7 (medium); CVSS:3.1/AV:A/AC:H/PR:L/UI:N/S:U/C:L/I:H/A:H; source: CNA: zephyr

- CISA KEV: No listing in collected sources

- EPSS: Not available

- SSVC: Not available

- Weaknesses: CWE-787

## Exploit evidence

No exploit evidence in collected sources. This is not proof of no exploitation.

## References

- https://github.com/zephyrproject-rtos/zephyr/commit/64b1e7447856f635ee8bce9eab7c615da78133b8 (CNA: zephyr; patch)

- https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-47vq-phhp-rhxq (CNA: zephyr)

## Provenance

- CNA: zephyr: https://www.cve.org/CVERecord?id=CVE-2026-85034; retrieved 2026-11-03; source updated 2026-11-03

Revision: c904d7830284273e2d013695e190271d2805a9554ed2115f81c224e5e200ade8

Canonical: https://y2.dev/cve/CVE-2026-85034

## Agent and API access

Public CVE pages, Markdown, and JSON are free to read without an account or API key.

- Public catalog: https://y2.dev/cve/index.json. Follow nextCursor with the same search, filters, sort, and limit (1–100). A null cursor marks the end.

- WebMCP: search_cve_disclosures, get_cve_disclosure, get_cve_page_markdown, get_y2_cve_access. Available in compatible browsers.

- Cyber API: https://api.y2.dev/api/v2/cyber/cves and https://api.y2.dev/api/v2/cyber/cves/{cveId}.

- Y2 Pro or Elite: create a workspace API key with the intel:cyber scope and send Authorization: Bearer <Y2_API_KEY>. Setup: https://y2.dev/docs/api/create-key.

- x402: Pay per request without an account or API key. Omit Authorization, read the HTTP 402 PAYMENT-REQUIRED challenge, validate its current requirements, and retry with PAYMENT-SIGNATURE through an authorized payment client. These browser tools never make payments. Guide: https://y2.dev/docs/api/x402.

- OpenAPI: https://y2.dev/api/openapi.yaml. Agent access metadata: https://y2.dev/cve/agent.json.

Collected public records only. Check source status for coverage and freshness.