Public vulnerability disclosure

CVE-2026-31488

CVE-2026-31488

publishedCWE-416CWE-1288

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Do not skip unrelated mode changes in DSC validation Starting with commit 17ce8a6907f7 ("drm/amd/display: Add dsc pre-validation in atomic check"), amdgpu resets the CRTC state mode_changed flag to false when recomputing the DSC configuration results in no timing change for a particular stream. However, this is incorrect in scenarios where a change in MST/DSC configuration happens in the same KMS commit as another (unrelated) mode change. For example, the integrated panel of a laptop may be configured differently (e.g., HDR enabled/disabled) depending on whether external screens are attached. In this case, plugging in external DP-MST screens may result in the mode_changed flag being dropped incorrectly for the integrated panel if its DSC configuration did not change during precomputation in pre_validate_dsc(). At this point, however, dm_update_crtc_state() has already created new streams for CRTCs with DSC-independent mode changes. In turn, amdgpu_dm_commit_streams() will never release the old stream, resulting in a memory leak. amdgpu_dm_atomic_commit_tail() will never acquire a reference to the new stream either, which manifests as a use-after-free when the stream gets disabled later on: BUG: KASAN: use-after-free in dc_stream_release+0x25/0x90 [amdgpu] Write of size 4 at addr ffff88813d836524 by task kworker/9:9/29977 Workqueue: events drm_mode_rmfb_work_fn Call Trace: <TASK> dump_stack_lvl+0x6e/0xa0 print_address_description.constprop.0+0x88/0x320 ? dc_stream_release+0x25/0x90 [amdgpu] print_report+0xfc/0x1ff ? srso_alias_return_thunk+0x5/0xfbef5 ? __virt_addr_valid+0x225/0x4e0 ? dc_stream_release+0x25/0x90 [amdgpu] kasan_report+0xe1/0x180 ? dc_stream_release+0x25/0x90 [amdgpu] kasan_check_range+0x125/0x200 dc_stream_release+0x25/0x90 [amdgpu] dc_state_destruct+0x14d/0x5c0 [amdgpu] dc_state_release.part.0+0x4e/0x130 [amdgpu] dm_atomic_destroy_state+0x3f/0x70 [amdgpu] drm_atomic_state_default_clear+0x8ee/0xf30 ? drm_mode_object_put.part.0+0xb1/0x130 __drm_atomic_state_free+0x15c/0x2d0 atomic_remove_fb+0x67e/0x980 Since there is no reliable way of figuring out whether a CRTC has unrelated mode changes pending at the time of DSC validation, remember the value of the mode_changed flag from before the point where a CRTC was marked as potentially affected by a change in DSC configuration. Reset the mode_changed flag to this earlier value instead in pre_validate_dsc(). (cherry picked from commit cc7c7121ae082b7b82891baa7280f1ff2608f22b)

Technical severity7.8 highCVSS 3.1 · NVD: 416baaa9-dc9f-4396-8d5f-8c081fb06d67
Published2026-04-22Source updated 2026-11-11
Collected2026-11-121 attributed source

Fixes and workarounds

Fix

The reporting source identifies this reference as a patch. Check the advisory for affected versions and supported release branches.

Source: 416baaa9-dc9f-4396-8d5f-8c081fb06d67

Fix

The reporting source identifies this reference as a patch. Check the advisory for affected versions and supported release branches.

Source: 416baaa9-dc9f-4396-8d5f-8c081fb06d67

Fix

The reporting source identifies this reference as a patch. Check the advisory for affected versions and supported release branches.

Source: 416baaa9-dc9f-4396-8d5f-8c081fb06d67

Fix

The reporting source identifies this reference as a patch. Check the advisory for affected versions and supported release branches.

Source: 416baaa9-dc9f-4396-8d5f-8c081fb06d67

Affected products and versions

Affected products, source version ranges and reporting authorities
ProductVersionsAuthority
linux_kernel
linux
≥ 5.18.1; < 6.12.80 (affected, custom) NVD
linux_kernel
linux
≥ 6.13; < 6.18.21 (affected, custom) NVD
linux_kernel
linux
≥ 6.19; < 6.19.11 (affected, custom) NVD
linux_kernel
linux
5.18 (affected, custom) NVD
linux_kernel
linux
7.0 (affected, custom) NVD

Version ranges are source assertions. Check the vendor advisory and your installed configuration before determining exposure.

NVD applicability configurations (1)

These expressions retain AND/OR operators, negation, and required environmental products. A listed product is not sufficient to establish exposure when additional conditions apply.

[
  {
    "negate": false,
    "nodes": [
      {
        "cpeMatch": [
          {
            "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
            "versionEndExcluding": "6.12.80",
            "versionStartIncluding": "5.18.1",
            "vulnerable": true
          },
          {
            "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
            "versionEndExcluding": "6.18.21",
            "versionStartIncluding": "6.13",
            "vulnerable": true
          },
          {
            "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
            "versionEndExcluding": "6.19.11",
            "versionStartIncluding": "6.19",
            "vulnerable": true
          },
          {
            "criteria": "cpe:2.3:o:linux:linux_kernel:5.18:-:*:*:*:*:*:*",
            "vulnerable": true
          },
          {
            "criteria": "cpe:2.3:o:linux:linux_kernel:7.0:rc1:*:*:*:*:*:*",
            "vulnerable": true
          },
          {
            "criteria": "cpe:2.3:o:linux:linux_kernel:7.0:rc2:*:*:*:*:*:*",
            "vulnerable": true
          },
          {
            "criteria": "cpe:2.3:o:linux:linux_kernel:7.0:rc3:*:*:*:*:*:*",
            "vulnerable": true
          },
          {
            "criteria": "cpe:2.3:o:linux:linux_kernel:7.0:rc4:*:*:*:*:*:*",
            "vulnerable": true
          },
          {
            "criteria": "cpe:2.3:o:linux:linux_kernel:7.0:rc5:*:*:*:*:*:*",
            "vulnerable": true
          },
          {
            "criteria": "cpe:2.3:o:linux:linux_kernel:7.0:rc6:*:*:*:*:*:*",
            "vulnerable": true
          },
          {
            "criteria": "cpe:2.3:o:linux:linux_kernel:7.0:rc7:*:*:*:*:*:*",
            "vulnerable": true
          }
        ],
        "negate": false,
        "operator": "OR"
      }
    ],
    "operator": "OR"
  }
]

CVSS assessments

CVSS scores, vectors and reporting authorities
Version / scoreVectorAuthority
3.1 / 7.8
high
CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:HNVD: 416baaa9-dc9f-4396-8d5f-8c081fb06d67
3.1 / 7.8
high
CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:HNVD: 0b0ca135-0b70-47e7-9f44-1890c2a1c46c

Exploit evidence

No exploit evidence in collected sources. This is not proof of no exploitation.

References

For agents and automation

Read public disclosures for free as Markdown or JSON. Compatible browsers also expose native WebMCP tools to search disclosures, read this page, and discover API access.

Use the ontology-linked Cyber API with x402 pay per request, or a Y2 Pro or Elite API key with the intel:cyber scope.

Endpoints and access details

https://api.y2.dev/api/v2/cyber/cves
https://api.y2.dev/api/v2/cyber/cves/{cveId}

A workspace owner or admin can create a Pro or Elite API key. Send Authorization: Bearer <Y2_API_KEY> from your trusted agent runtime.

For x402, omit Authorization and read the HTTP 402 payment challenge before signing a retry. Public browser tools do not make payments.

Agent access JSON · OpenAPI · CVE API guide