Public vulnerability disclosure

CVE-2026-10686

Missing hop-limit decrement on IPv6 forwarding path allows unbounded packet looping (DoS) in Zephyr routers

publishedCWE-835

Zephyr's IPv6 forwarding path re-sent routed unicast packets without ever decrementing the IPv6 hop limit. Both routing branches of ipv6_route_packet() (subsys/net/ip) were affected: the explicit-route path (net_route_packet()) and the on-link cross-interface path (net_route_packet_if()). Each set the packet forwarding flag and called net_send_data() with the hop limit untouched and no expiry check. Per RFC 8200 the hop-limit decrement is the mechanism that bounds packet lifetime and terminates routing loops; without it, a device acting as an IPv6 router relays looping packets indefinitely. An on-path attacker who can induce or exploit a transient L3 loop turns it into a permanent forwarding storm, causing CPU/bandwidth resource exhaustion (availability DoS) on the forwarder and adjacent links; path-discovery and loop diagnostics that rely on hop-limit expiry are also defeated. Affected configurations. In every affected release the forwarding path is reached via CONFIG_NET_ROUTE (enabled by default when CONFIG_NET_IPV6_NBR_CACHE is set), together with CONFIG_NET_ROUTING for cross-interface routing. Note that CONFIG_NET_IPV6_FORWARDING and CONFIG_NET_IPV4_FORWARDING — which appear in the fix and in this advisory's evidence notes — were introduced after v4.4.0, when the routing options were split and renamed; they do not exist in any affected release. When auditing a v4.4.1-or-earlier configuration, look for CONFIG_NET_ROUTE and CONFIG_NET_ROUTING. IPv4 is not affected in any release. The IPv4 forwarding path (net_route_ipv4_packet() in route_ipv4.c) was added after v4.4.0 and has never shipped in a release. Its TTL decrement and IPv4 header-checksum recomputation landed on main as part of the same fix, so the evidence notes below discuss it, but no released version is reachable by way of IPv4. Affected releases are v1.8.0 through v4.4.1: v1.8.0 introduced net_route_packet() and v2.2.0 added net_route_packet_if(), and neither decremented the hop limit. v4.3.1 carries the explicit-route fix but not the on-link one, so it is affected as well. Fixed on main by 7d8f1afa7345 (explicit-route path) and 589eadc74efa (on-link path).

Technical severity5.8 mediumCVSS 3.1 · CNA: zephyr
Published2026-07-31Source updated 2026-11-04
Collected2026-11-043 attributed sources

Fixes and workarounds

Fix

The reporting source identifies this reference as a patch. Check the advisory for affected versions and supported release branches.

Source: CNA: zephyr

Fix

The reporting source identifies this reference as a patch. Check the advisory for affected versions and supported release branches.

Source: CNA: zephyr

Fix

The reporting source identifies this reference as a patch. Check the advisory for affected versions and supported release branches.

Source: [email protected]

Fix

The reporting source identifies this reference as a patch. Check the advisory for affected versions and supported release branches.

Source: [email protected]

Affected products and versions

Affected products, source version ranges and reporting authorities
ProductVersionsAuthority
zephyr
zephyrproject
zephyr
https://github.com/zephyrproject-rtos/zephyr
≥ 1.8.0; < 4.5.0 (affected, semver)
Other versions: unaffected
CNA: zephyr

Version ranges are source assertions. Check the vendor advisory and your installed configuration before determining exposure.

NVD applicability configurations (1)

These expressions retain AND/OR operators, negation, and required environmental products. A listed product is not sufficient to establish exposure when additional conditions apply.

[
  {
    "negate": false,
    "nodes": [
      {
        "cpeMatch": [
          {
            "criteria": "cpe:2.3:o:zephyrproject:zephyr:*:*:*:*:*:*:*:*",
            "versionEndExcluding": "4.5.0",
            "versionStartIncluding": "1.8.0",
            "vulnerable": true
          }
        ],
        "negate": false,
        "operator": "OR"
      }
    ],
    "operator": "OR"
  }
]

CVSS assessments

CVSS scores, vectors and reporting authorities
Version / scoreVectorAuthority
3.1 / 5.8
medium
CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:C/C:N/I:N/A:LCNA: zephyr
3.1 / 7.5
high
CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:HNVD: [email protected]
3.1 / 5.8
medium
CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:C/C:N/I:N/A:LNVD: [email protected]

Exploit evidence

References

For agents and automation

Read public disclosures for free as Markdown or JSON. Compatible browsers also expose native WebMCP tools to search disclosures, read this page, and discover API access.

Use the ontology-linked Cyber API with x402 pay per request, or a Y2 Pro or Elite API key with the intel:cyber scope.

Endpoints and access details

https://api.y2.dev/api/v2/cyber/cves
https://api.y2.dev/api/v2/cyber/cves/{cveId}

A workspace owner or admin can create a Pro or Elite API key. Send Authorization: Bearer <Y2_API_KEY> from your trusted agent runtime.

For x402, omit Authorization and read the HTTP 402 payment challenge before signing a retry. Public browser tools do not make payments.

Agent access JSON · OpenAPI · CVE API guide